Videos

As far as the operation of this equipment is concerned, we even have a matrix, a safety matrix in relation to its operational procedure.

So, all of this stuff has been put together for a reason, primarily because, it’s designed for you to follow that information and adhere to the important notes here; in relation

to what can go wrong as far as this machine is concerned.

If you follow all the basic setups for this, to be quite honest, I have trouble for motoring as far as the functionality of this equipment is concerned. So, all the information here is here for a reason as a guide and the appropriate manner, in which to operate their equipment.

So, just to run through what we’ve got here in front of us is, we have an air inlet, moisture separator, regulator.

What it does? The air is one-inch line. So, it’s a one-inch pins up coupling. Safety pins goes through to a valve. The valve, when actuated, lets the air run through the moisture separator, the regulator

The regulator should be preset before it comes to side. But what you’re looking for is you want a 100 psi on that. 100 psi, the line goes up and feeds the pulsing valves, Goyen valves.

So, the Goyen valves as I mentioned before, keep the filters cleaned throughout the unit; so they assist in removing excessive dust.