Spray Pump Machine Equipment Buying Guide

The Graco King Sprayer is the latest technology in airless sprayers. These airless sprayers are used by industrial painting contractors because of their ability to reliably spray a lot of paint. Previous units were called the bulldog, king, NXT and Extreme Pumps. The king has many new features including de-icing modes that make a big different for painting contractors.

• Pneumatic Air Driven motor
• De-icing functionality
• XL Motor with more power
• Uses Xtreme and MaxLife Lowers

Most common King sprayer sizes

• GM K60MH2 – 6,000 psi – spray 12.9 litres/minute
• GM K70MH2 – 7,250 psi – spray 11 litres/minute

Contact us for availability in Malaysia

APPLICATIONS

• Spraying Coatings with over 30 minute pot life
• Spraying with Multiple guns
• Spraying with multiple hoses
• Highly portable
• Contractors Choice

The Merkur Pump is used by painting contractors who want a good flow of paint for high productivity but need a better finish. This is often used in paint shops to apply top coats for more public/visible areas.

• Low pulsation output
• Better finish with consistent pattern and film

Most common Merkur sprayer sizes

• GM 16U920 – 4,800 psi – spray 4.5 litres /minute
• GM 16U918 – 7,250 psi – spray 3 litres /minute

APPLICATIONS

• Fine Finish industrial top coats
• Spraying Coatings with over 30 minute pot life
• Spraying with Multiple guns
• Spraying with multiple hoses
• Highly portable

The UltraMax Sprayer is most commonly used by domestic and commercial painting contractors. This pump is preferred by these contractors because it is very durable, portable and gives them a very high performance.

• Quick knockdown ‘Endurance Pump’
• Digital display with volume sprayed tracking
• Built-in filter
• Available as Air-Driven, Petrol or Electric
• 3300 psi

APPLICATIONS

• Domestic and commercial painting
• Spraying Coatings with over 30 minute pot life

The Triton 308 is the industry preferred sprayer to replace conventional air-spray pressure pots. The Triton is air-driven 1:1 diaphragm dual-acting pump which is ideal for spraying most primer coats. When mounted with an air-powered agitator, zinc will stay mixed in the coating.

Uses air spray technology to atomize the coating

• 100 psi max fluid pressure
• Fluid recirculation valve
• 6 litre/minute max flow rate
• Available as Cart mount (Most Popular), pail mount, stand mount or wall mount.

Contact us for availability in Malaysia

APPLICATIONS

• Air Spray / Conventional Sprayers
• Zinc primers
• Pressure Pot replacement

The Graco XP Sprayer is designed to help contractors to spray plural component coatings with ease. It removes the need to ‘hot-potting’ where the painter has to mix the 2 components together before introducing to the pump. This hot-potting on the fly allows contractors to spray coatings that have only a 3 minute pot life, keeping each component of the coating separate until it reaches the spray hose. Built for continuous high production use, contractors swear by their money-saving features.

• Uses Xtreme Lowers
• Pneumatic Air Driven motor
• De-icing functionality

Contact us for availability in Malaysia

APPLICATIONS

• Plural Component coatings with 3+ minute pot life
• Multiple Spray operators
• Paint Booth or On jobsite applicable
• Can be used with remote mix manifold

The Graco XM is the efficient plural component sprayer on the market with a variable dial to change the ratio on the fly. This system has an automated ratio check function where the pump will stop if it detects you are starting to spray off ratio, giving asset owners and painting contractors peace of mind.

The 2 parts of the paint will stay separate until they are combined in the remote mix manifold and in the paint hose, this is the ideal scenario when you are spraying coatings with a pot life of under 3 minutes.

• Works with feed pumps from drums
• Uses Xtreme Lowers
• Pneumatic Air Driven motor
• De-icing functionality
• Has separate solvent flush pumps to speed cleanup
• Has heated tanks and line heaters.

APPLICATIONS

• Plural Component coatings with 3+ minute pot life
• Multiple Spray operators
• Paint Booth or on jobsite applicable
• Used with remote mix manifold

Spraying fast set coatings, you only have 2 seconds once the coating is mixed to when it cures. This means you need to mix the coating, in the tip of the gun. Coatings like polybrid, foam and other fast set coatings usually use a Graco Reactor for easy spraying. These coatings are typically applied thick

• 2000-3500 psi
• Electric Operation
• Plural Fast Set coatings
• Mixes in the gun tip

APPLICATIONS

• Multiple Operators
• Foam and Quick set coatings