Description
The Combo Valve offers an unbeatable combination of operator safety, unmatched performance, rugged durability and dependability.
APPLICATIONS
A combination valve, typically used in conjunction with a Micro Valve, controlling air both in and out of the blast pot. Eliminates high maintenance cost of using dual valves.
SPECIFICATIONS
- Combined inlet and exhaust valve functions
- Full-ported, 1 1/4″ (32mm) thread, inlet side
- Rugged, compact design
- Simple to install and service
- Optional Jumbo 1 1/5″ (38mm) full ported thread also available for high flow applications
- Note: all parts below suit the 1 1/4″ Combo Valve
COMMONLY ORDERED
Item No. | Description | Part No. | Mfg Part No. |
---|---|---|---|
Combo Valve 1 1/4″ (32mm) | DM2223000 | 2223-000 | |
Jumbo Combo Valve 1 1/2″ (38mm) – used in the ASAP System | DM2223002 | 2223-002 | |
* | Service Kit for 1 1/4″ Combo Valve (*) | DM222300099 | 2223-000-99 |
PARTS BREAKDOWN
Item No. | Description | Part No. | Mfg Part No. |
---|---|---|---|
1. | Cap | DM222300001 | |
2. | Pinch Ram | DM222300002 | |
3. | Upper Rod Guide | DM222300003 | |
4.* | Seal (Upper Rod) | DM222300004 | |
5. | Spring | DM222300005 | |
6. | Bolt, 1/2″ UNC x 9″ | DM701051118 | |
7. | Cylinder | DM222300007 | |
8.* | O-ring (Shaft) | DM222300008 | |
9.* | Snap Ring | DM222300009 | |
10. | Seal (Lower Rod) | DM222300010 | |
11. | Piston | DM222300011 | |
12. | Shaft | DM222300012 | |
13.* | Piston Seal | DM214900004 | |
14. | Nut, 1/2″ UNC | DM214900008 | |
15. | Lower Rod Guide | DM222300015 | |
16.* | O-ring (Lower Rod Guide) | DM222300016 | |
17. | Base | DM222300017 | |
18.* | Valve Plug | DM222300021 | |
19.* | O-ring (Combo Valve Plugs) | DM222300020 | 2152-000-06 |
20.* | Fender Washer, 3/8″ | DM7016507 | |
21.* | Nylock Nut, 3/8″ UNC | DM7019507 | |
22. | Flat Washer, 1/2″ SAE | DM702750402 | |
23. | Combo Drive Pin | DM222300019 | |
24. | Vent, 1/8″ | DM2014300 | 2014-300 |
25. | 90 Degree Swivel, 1/2″ x 1/2″ | DM420350404 |
* Included in Service Kit for 1 1/4″ Combo Valve